Evolved blanks and actions – developed by specialists. The Prorex XR series offers an astonishing lineup for pursuing every field of application at modern spin fishing! The extremely slim and lightweight HVF Nanoplus blanks feature an astonishing handling and enable convenient fishing also during long sessions. The HVF Nanoplus technology cares for a light and perfectly balanced rod weight and leads to a crisp and very fast blank action. The blank instantly transmits every bottom contact and even softest taps straight to the hand and enables a perfect lure feeling. The application of nano particles at the resin elevates the carbon content to a maximum, allowing the design of fast and lightweight rods with high durability. The exclusive X45 blank design leads to ultimately distortion-proof blanks. After the cast the rods instantly resign to the starting position, allowing long and accurate casts. The V-Joint connection cares for a harmonic bending curve under strain. The exclusive carbon fiber DAIWA Air Sensor reel seat is ergonomically shaped and significantly contributes to the pleasant handling of these rods. Latest premium rod manufacturing technology. Innovative and reliable components.

The models with casting weights from 10-30g up to 18-84g are perfectly suited when softlures at the jighead or twitchbaits, cranks or spinnerbaits should be applied. Depending on the casting weight you find rods for a large field of application within this rod range: Fishing for perch, chub and trout with small soft- or hardbaits or jigging for pike and zander with a variety of different techniques. Rods with casting weights up to max. 30g and a length of up to 2.65m are equipped with exclusive EVA carbon fiber handles – perfect handling and lure feeling guaranteed! Rods with a higher casting weight are equipped with an EVA handle to support the rod balance.

• HVF® Nanoplus carbon fiber blank

• X45® carbon fiber construction

• V-Joint® put-over joint

• DAIWA® Air Sensor reel seat

• Fuji® Alconite K-guides

The Catspin model from the Pro Staff Catfish range has been developed for active spin fishing from the boat and the shore. Special emphasis has been put on the blank design – the rod allows the application of a broad range of different lures and lure weights. The backbone offers huge reserves to control large catfish even under harsh conditions. The length of 2.60m is especially convenient when fishing from the bank but also allows the application from the boat. The Pro Staff Catspin rod can also be used for fishing for pikes with Big Baits. Equipped with ergonomic DAIWA Air Sensor reel seat and premium cork handle.

• HVF® Nanoplus carbon fiber blank
• X45® carbon fiber construction
• V-Joint® put-over joint
• Premium cork grip
• DAIWA® Air Sensor reel seat
• Fuji® Alconite K-guides
• Pacbay buttcap

The diverse target fish rods of the Seahunter X series have been optimized for the respective field of application and the individual fishing methods. Superbly equipped with saltwater-proof Seaguide guides, HMC+ carbon fiber blanks, robust spigot joints and non-slip EVA handles the Seahunter X rods are available at an excellent price-performance ratio.
SEAHUNTER X PILK COALFISH
JIGGER ROD | H
The two coalfish rods are ideally suited for the use of shads or smaller pirks and offer huge fighting fun. The harmonic action of the rods reliably prevents unhooking during the fight and allows good casting distances at fishing from the boat and the shore.

SEAHUNTER X PILK COD
JIGGER ROD | XH
The two cod models with strong tip action and power-backbone seductively accelerate shads and pirks and don't give in even when fighting extra-large opponents! The Seahunter X Pilk Cod are reliable companions on the German seas as well as at the Scandinavian inshore waters.

SEAHUNTER X PILK MACKEREL
JIGGER ROD | H
With the Mackerel rod even the fight with several fish at the same time does not represent a problem. The blank offers enough power reserves to tame the powerful fish and lift them on board easily.

• HMC+® carbon fiber blank
• Spigot put over joint
• Premium EVA grip
• DPS reel seat
• Seaguide® titanium oxide guides

The two X-Compact rods from the Ninja X series are the most compact spinning rods across the entire DAIWA rod range. The telescopic tip sections with detachable handle feature a closed length of only 50cm – these rods can be easily transported in a backpack or suitcase and are ready-to-fish immediately. The composite carbon fiber blanks with wrapped guides made by Seaguide leave no wish unfulfilled regarding casting and fighting performance and make the Ninja-X-Compact rods a fully adequate companions at every fishing trip.

• Carbon composite blank
• Premium EVA grip
• Functional reel seat
• Seaguide® titanium oxide guides
• Hook keeper

The Target Spoon rods with parabolic action are perfectly suited for casting light and ultra-light hardbaits to long distances. Fighting fun guaranteed!

With the Triforce target fish rods you are optimally prepared for most techniques of modern spin fishing!

Regardless if you are fishing with small spoons for trout or are using large hardbaits for pike – the Triforce series from DAIWA contains a proper rod for almost every domestic predator species.

The Triforce rods combine ultra-modern design with an exceptional price-performance ratio!

With the Ninja X Kids rods DAIWA offers short rods especially designed for being applied by kids and adolescents. The lengths of 1.60m and 1.80m make handling with these rods very easy. The 1.80m long Power Kids model with 20-60g casting weight allows also the use of heavier lures and baits for targeting pike or carp. The action of the HMC+ carbon fiber blanks has been designed to enable good casting distances and make a versatile application possible.

The blanks with robust double leg guides withstand also larger strains!

• HMC+® carbon fiber blank
• Cork / EVA grip
• DPS reel seat
• Titanium oxide double leg guides

Equipped with the utmost premium components the action of the SVF nanoplus blanks has been precisely matched to the requirements of modern fishing for perch, zander and pike. The Perch and Zander Attack models with 7-32g (Perch) or 14-56g (Zander) casting weight are extremely fast, feature a stiff tip and transmit the attacks of predators perfectly to the handle section. Shads can be presented and accelerated in a highly accurate way. These rods are also perfectly suited for fishing with hardbaits. Twitchbaits and plugs can be casted to long distances and presented in an aggressive way. The action of the Pike Attack rod with 18-64g casting weight is well suited for classic shad fishing but also does a superb job at steady retrieve fishing with soft plastic lures, medium swimbaits and plugs. At strain this rod displays a soft parabolic at the backbone – perfect when powerful flights have to be absorbed during the fight with big fishes. Thanks to the application of an improved BIAS carbon fiber material the V-Joint Alpha spigot joint connection has been designed even thinner, resulting in a stability increase of up to 10% and a further improved bending curve due to the material saving.

• SVF® Nanoplus carbon fiber blank
• X45® carbon fiber construction
• V-Joint® Alpha spigot joint
• Cork grip in premium quality
• Fuji® reel seat
• Tubular tip
• Fuji® Titanium SiC K-guides
• Hook keeper
• Exclusive transportation holdall

DAIWA PRO STAFF VERTICAL