Clear all
The groundbait rods in this collection cover classic feeder, method, telescopic solutions, spare tops and groundbait groundbait models. The difference is not just in length. The construction, operating range and number of sections determine how the rod behaves when cast, how it detects bites, and how conveniently it is carried to the fishing venue.

Start the selection from the total weight of the feeder, groundbait and rig, then gauge the distance and strength of the current. On a closed fishing venue, fine reading may be more important, while the river requires stable control under constant pressure. Telescopic feeder wins in transport, but it must be evaluated by the same operating criteria, not just its compactness.

See more View less

Feeder Rod - DAIWA N'ZON SUPER SLIM FEEDER is a practical example of a series of HMC+ carbon blanks and a noticeably smaller diameter. Thin profile alone does not determine the appropriate option; compare the specific variant with the weight of the rig and the distance sought. Thus, the characteristic becomes a real convenience, instead of being chosen only by appearance.

The tip should show the bites distinctly, without being overwhelmed by the draft or feeder. Check which tips are provided for the selected stick and do not assume that each spare part fits. The reel also has to balance the assembled tackle: an excessively heavy set wears out in frequent overswing, and an inappropriate weight position makes the movement uncertain. Before the outing, assemble the sections and run the fishing line through the guides to detect in time an incorrect alignment or an incorrect balance.

In feeder method, the emphasis is on the repeated feeding of the loaded rig and the control when pulling out. In the classical approach, choice can be guided more by the sensitivity and behavior of different feeders. If the shore is narrow or there is vegetation behind, provide for the real space for swing; The nominal distance is of no use when you cannot unbend the stick safely.

After fishing, lower the tip carefully, release the assemblies in a straight line and remove the grit around the compounds. Look at the guides with a soft cloth, because an inconspicuous edge can damage the fishing line on the next cast. Store the sections supported along their entire length and keep the finest tips in a hard safety tube.

Before you finish the feeder set, review Fishing accessories according to the conditions in which you will hunt. If you want a wider comparison of the sticks, proceed to Rods. If compatibility between the selected elements is required, pay attention to Parts for fishing rods and reelsbefore you finish the arrangement.