Clear all
Spinner hooks perform different tasks according to the lure design and the way it passes through the water. Triple models are a typical choice for wobblers and sparklers, single ones leave one working point, and offset ones combine with silicones when the tip should remain retracted. So first determine the lure and the terrain, then look for the appropriate shape.

For replacing a three or for assembling a specific lure Gamakatsu 13B - BRONZE treble hooks are a universal example. They are made of forged steel with a high carbon content and are designed to resist bending and breaking under load. Dimensions cover No 12, No 10, No 2, No 1/0 and No 2/0, so the comparison must be with the original hook.

See more View less

When changing, look not only at the number, but also at the overall gauge of the three, the freedom around the ring and the distance to the body of the lure. Too large a pattern can restrict movement or hook into the other hook; too small changes the ratio intended for the lure. After rig, make a trial run near the shore.

The offset hook is adjusted to the length and thickness of the silicone. The place where the tip exits or remains hidden must allow the body to stand upright without twisting. In a single uncontiguous variant, keep tension during the extraction; This is especially important in sudden changes in direction and immediately before the landing net.

In an open section and around obstacles, the same configuration does not necessarily work the same, because the risk of hooking and the freedom to keep are different. Don't increase the size mechanically because of a missed hit. First check the sharpness, the position of the silicone, the free movement of the wobbler or the flash and the timing.

After use, remove the adhesive, rinse in contact with salt water and let the metal parts dry well. Keep the spare threes in compartments according to size, but don't press them into each other. Before the next outing, examine the tips, ears and curves; visible deformation is the cause of replacement, not straightening with pliers.

When arranging the tackle for different lures, start from Spinning Fishing and conform the rig to the specific way of keeping. In Hooks you can continue the comparison according to the required rig, and Float fishing hooks is a logical next step if you want to distinguish the spinning choice from the float choice.