Clear all
The feeder line works as a system of basic fishing line, connecting sections and leader, and each element solves a separate task. This section collects monofilament and fluorocarbon fishing lines, leaders, glaucor and 8-thread knitted variants. The right combination depends on the distance, cast load, rig and indication sought, not just the inscription on the spool.

Knitted fishing line for feeder fishing PRESTON REFLO is a 8-threaded, sinking zero-expansion variant. These characteristics give a direct and timely indication, including in sluggish bites. However, it is the lack of stretching that requires the whole set top, drag, links and leader to be set up consistently, without any sharp discrepancies between the individual parts.

See more View less

Three verified routines are available: 0.08mm/6kg, 0.10mm/7.20kg and 0.12mm/8.4kg. Start from the actual load and the required strength, then choose a diameter. The thinnest option is not automatically the best for any distance, and the highest indicated strength does not negate the need for suitable knots and proper winding.

If the rig includes a shock feeder leader, align the connecting node with the guides and the way the line lies on the spool. Monofilament, fluorocarbon section, leader and glaucor should not be added mechanically just because they are present among the possibilities. Each additional transition means another node that must be needed, purely tied and compatible with the adjacent diameters.

The sinking braided line facilitates the laying of the line after casting, but the excess clearance again slows down the distinct contact with the rig. In the course, follow the arc formed and do not stretch to the extent that you move the feeder. In calm water, the adjustment can be finer, with the tip remaining loaded enough for clear reading without unnecessary tension.

Roll the braided fishing lines evenly and under controlled pressure, not allowing free coils. Before taking off, inspect the starting section, nodes and places that pass most often through the guides. After contact with a sharp edge or visible injury, the affected part is removed. The most common omission is to look only at the declared strength, without checking the connections and the condition of the line.

When assembling the feeder line, start with fishing lines/Causes for a broader view of the fishing lines and the leaders, then compare with Knitted fishing lines for feeder fishing, if you are looking for separately the knitted solutions. The rest of the tackle is next in the direction Fishing accessoriesto logically go from the line to the whole feeder set.