Clear all
The Rod Pod section and stands gather solutions for a stable and orderly deployment of the tackle: tripods, whole systems, elder bars, single supports, attachments, peg heads and rollers for the pole. Each group solves a different problem by the water, so first specify what the weight should carry, how many positions are needed and on what basis you will arrange the equipment.

When fishing on the bottom, the rod pod is practical when you want a common frame for fishing rods and signalling, and the stand-alone pegs give more freedom to spread out. Buzz bars line up the pivot points on a line, while the heads complete the single stand. Don't mix these roles: the stable base does not compensate for the inappropriate nozzle or its inaccurate fastening.

See more View less

When working with a pole stick, the priority is free and controlled movement back and forth. Here the roller performs a completely different task than the bottom fishing rod supports. Consider its height and position with the pole-disassembly location, feed direction and surrounding obstacles so that individual sections do not pass under tension or through an acute side angle.

Roller for Daiwa Rockin Roller - DRR is a specific option for keeping the pole on two rollers. The construction also keeps the movement on them when the slope changes, and the end rollers are placed at an angle 20 degrees. This limits vibration and helps the pole stay in its working line when smoothly fed and harvested.

Compatibility is judged separately for each part. In attachments, check the grip point to the platform; in case of elderberry bar consider the number and location of supports; at the head see the thread on the peg. For a roller, leave enough space along the pole path. Do not assume that close-range accessories necessarily connect with each other.

Before you begin, unfold the system completely and check the locks, turns and pivots with a slight pressure. The rollers should move freely, without sticking grit, and the stand should not be twisted during normal operation. After the outing, clean the assembly sites and put the individual elements dry to remain easy to set up at the next stacking.

When you arrange your place by the water, start from Stands and consider how you will set the fishing rods relative to the rest of the tackle. For a more complete configuration compare variants in Rod Pod and carp fishing stands, and if you want to continue with the choice of complementary equipment, move on to All products.