Clear all
In TsuriMusha, the focus here is on a fishing rod attachment, not the full manufacturer range. Such an accessory makes sense when the space does not allow a standard peg or when the fishing rod must stand on an already available piece of equipment. Important are the attachment surface, free space and convenient access to the handle.

Rod Stand TsuriMusha MIGHTY ARM F091 uses a bracket and can be moved between a railing, a suitable pipe, a cooler or a leisure chair. The holder adjusts to the desired position of the fishing rod and the technique used. This mobility is practical, but each new location requires a separate grip check before the tackle is left on the support.

See more View less

The chosen base should be firm, stable and with enough space around the bracket. Before tightening, look to see if an edge, lid or removable part will not interfere with proper bedtime. For example, in a cooler, there must remain the possibility of opening, and in a railing, the holder must not interfere with movement in the limited space.

GFRP was used for the clamp and holder, while the screws and pins were stainless steel. The difference between these elements is important in service: The grit should be removed from the movable links, and the threads checked for even movement. Do not tighten excessively if the stand is already fixed and does not shift with moderate inspection.

The angle is determined after the fishing rod is inserted, not just by the empty holder. Leave a free path for the line and make sure that the pulley, handle and surrounding objects do not touch. Take a short test with a careful load in the direction from which you will actually take the fishing rod. If the bracket is turned, change the position instead of just tightening more.

After completion, remove the adhered salt, mud or sand with clean water and dry the mechanism in the unfolded position. Check the pins and screws before the next mount, especially when the accessory often changes place. When transporting, stow the stand so that the holder does not press on letterheads or guides. Proper fixing and regular inspection are more important than constant overstretching.

Depending on where you will deploy the fishing rods, consideration of the TsuriMusha can proceed in several close directions. All products returns to the general catalog, Stands points to the stands as a separate group, and Sea fishing stands carries the comparison into a maritime context. Select the section that corresponds to the specific setting by the water.