Handle for landing net MAVER Elevator Handle Tele - 3/4m

What is the Maver Elevator Handle Tele landing net handle used for?

Maver Elevator Handle Tele is a telescopic landing net handle available in two lengths for reaching and controlling fish pulling. The accessory should be used with a compatible landing net head and without side-loading of the sections. The length is chosen according to the shore, the height above the water and the range required, not just the size of the fish.

What are the Maver Elevator Handle Tele variants?

The 3.00 m variant has code 02045300, three sections, transport length 115 cm, diameter 25 mm and weight 330 g. The 4.00 m variant has a 02045400 code, four sections, transport length 118 cm, diameter 31 mm and weight 526 g. Compare the code because the difference is not only in the total length.

How do I choose between 3 and 4 m for Maver Elevator Handle Tele?

Select 3.00 m when the shorter range is sufficient and the lower weight 330 g is an advantage. The 4.00 m variant provides another meter range, but weighs 526 g and has a larger diameter. Assess the actual fishing location, mode of operation and weight of the head before opting for the longer option.

How do I check the compatibility with a landing net head?

Before ordering, compare the thread and the way of connecting the particular head with the tip of the handle. The available data does not prove compatibility with any model, so do a test turn without force pressure. The head should lie down on the axis, fix itself steadily and not leave an excessive gap; in case of non-match, do not use an unconfirmed size adapter.

How do I unfold Maver Elevator Handle Tele safely?

Expand the sections alternately and along their axis, without abrupt pulling or twisting. Make sure each section is firmly fixed before placing a load on the head. Do not lift the fish into the air like a fishing rod; use the landing net guide handle and harvest the catch with controlled movement tailored to the terrain.

How is Maver Elevator Handle Tele cleaned and stored?

After fishing, disassemble or unfold the sections sufficiently, remove sand and dirt and dry them completely. Do not retract water and silt inward into the telescopic structure. Keep the handle without side pressure, and before a next outing check the threading, section ends and smooth movement, especially on the 4 four-piece variant.