How to choose feeder: method, cell, window and weight

A method feeder serves the bait to a compact spot, the cell releases the groundbait actively, and the window model carries a concentrated amount over a distance.

August 3, 2026

Фидер хранилка Daiwa NZON Distance Cage Feeder

feeder is selected according to how it should reach and release the groundbait, not just according to the grams. The method feeder serves a compact portion and the bait near it, the cage feeder scatters the mixture more actively, and the window feeder carries a concentrated portion and releases it in a controlled way. In the collection with feeder baskets has different forms; The right choice is the one that solves a specific task.

Before you prepare the bucket, answer four questions: what is the bottom, is there a current, how far you are fishing and how quickly you want the food to open. Then the weight and volume are arranged logically.

The type determines the way of filing

The feeder is not just a burden. The openings, shape, lead placement, and internal volume govern the flight, fall, and release of the mixture. Two models with the same grams can behave quite differently.

When you build the entire kit for Feeder Fishing, match feeder to rod, main fishing line and rig. Heavy model on fine tackle is risk; a very light basket in a strong jet does not remain on the stain. There is no way the accessory can be evaluated on its own.

Feeder method: concentrated spot around the bait

Method feeder has a flat or shaped surface on which a mixture, pellets or other suitable food is pressed. The short leader and bait are usually served in close proximity to the portion. This is useful in carp, crucian carp and other fish that feed on a compact spot.

The shape should fall steadily with the loaded side up or according to the designed orientation. If the feeder turns into soft silt, the presentation gets worse. A larger contact area and a lower profile can help, but sometimes a lighter construction is needed.

The mixture must withstand the cast and release after the fall. If it remains as concrete, it will not work as planned; if it falls into the air, the stain is lost. Make a sample in shallow water or a vessel before the first serious caste.

Cell feeder: rapid separation and wide use

The cage holds the groundbait in a mesh or perforated structure. Water penetrates from many sides and washes away the particles. This makes it practical for a classic feeder when you want a trace and a gradual release.

The more open cell works quickly and is suitable for an active mixture. The more closed holds longer and can carry the contents through the upper layer. As the weight of the water goes, the shape of the weight and the area to the water determine whether the feeder will stand or move.

The round basket often rolls more easily, while the rectangular or flat shape has more support. This does not cancel out the inlead weightence of the bottom and the jfl. Sometimes the correct cast trajectory gives more stability than added grams.

Window feeder: concentrated distance content

Window models have a closed body and a filling hole. They are useful for carrying particles, worms, pellets or a mixture that must remain inside during the flight. The aerodynamic shape can help with distance and sidewind.

The filling method controls the speed. If you close the opening with a damp mixture, the contents are held longer. If you leave a looser cork, opening is faster. Test to real depth because time to the bottom is involved as well.

Weight is selected with the food inside

The nominal grams indicate the weight of the empty feeder. After filling, the total load increases and must remain in the operating range of the rod. Leave a reserve for a wet mixture, a larger portion and a force cast.

In calm water, use the lightest weight that reaches the spot accurately and holds contact. In the course, increase gradually until the feeder stops crawling uncontrolled. If a huge increase is required, change the shape or position of the rod before proceeding with the grams.

For long-range, compact profile and stable flight are important. A large light cell has more air resistance than a small dense structure. The wind shows it immediately without asking.

Bottom changes correct answer

In slime, the heavy small base may sink, dragging the leader. A wider and lighter feeder distributes the load. For stones and shellfish, avoid forms that get stuck easily, and check the fishing line after each questionable release.

In vegetation, compact arrangement and clean leader are important. On a hard flat bottom, you can use a more stable weight and rely on a repeatable fall. Exploring the site with weight or proper keeping before meals saves many blank casts.

Volume controls the pace of eating

A big feeder is not always for a big fish. It is a tool of quantity. At first, a larger volume can be used to build a stain, then a smaller model maintains a rhythm without overfeeding. In cold water and cautious fish, small portions often give more control.

The mixture of Groundbait feeders must conform to the construction. A light active groundbait exits a cage quickly; sticky mixture holds particles in method form; chopped worms or pellets can be carried in a closed container. Not all combinations are equally pure.

Preparation is also part of the choice. The appropriate Feeding Tools help to evenly moisturize, and buckets and feeder sieves allow for breaking of lumps and repeatable filling.

How to test the feeder on the shore

Fill it in the usual way and drop it into shallow water. Detect approximately when the release begins and what remains after subtraction. Then make a few controlled casts without cause. Monitor flight, fall, and content status.

Compare the construction with Feeder mounts and accessories. Inline method, a paternoster with a cage and a closed feeder are not assembled by the same logic. If in doubt, describe the fishing venue and tackle in Help with selection.

For information on order, delivery and return use Frequently Asked Questions. On the watercourse, observe three signals: whether you reach the clip, whether the feeder stays on the spot and whether it returns empty. They say more than the name of the form.

Take brief notes on weight, shape, release time, and fish reaction. After a few trips, you'll know which two or three feeders cover your basic conditions, instead of carrying an entire box without a clear system.

The most useful feeder is one that carries the right amount to the right place and releases it at the planned time. The rest is tuning.