Spare thumb screw with thread SERIE WALTER RACER 36 BOLT SMALL

What is SERIE WALTER RACER 36 BOLT SMALL?

SERIE WALTER RACER 36 BOLT SMALL is a threaded spare spinner. The spare part should only be used after confirmation that the thread, size and rig site match the specific equipment. The word SMALL is part of the exact name and is not sufficient in itself to prove compatibility with another model or series.

How do I check SERIE WALTER RACER 36 BOLT SMALL compatibility?

Compare the exact model of the equipment, the diameter and pitch of the thread, the length of the bolt and the shape of the support surface. Do not screw the part forcibly and do not assume that a similar appearance means the same thread. If any of the parameters are missing, confirm it for the specific SERIE WALTER RACER 36 system before rig.

What should I check before installing the SERIE WALTER replacement joint?

Examine the thread, housing and contact surfaces for deformation, contamination or damage. Clean the rig site and roll the part first by hand, without tool and without strong pressure. If the twirl jams, stands crooked or does not reach its normal position, stop and check again the size and pitch of the thread.

Can SERIE WALTER RACER 36 BOLT SMALL replace each threaded spinner?

No, the presence of threading does not prove universal compatibility. The spare part must match the specific model, size and threaded connection of the equipment. Check also that the head shape allows normal tightening without leaning against adjacent elements. In case of a difference in thread or length, do not use a transitional clamping force.

How is SERIE WALTER RACER 36 BOLT SMALL cleaned and stored?

After use, remove dust and moisture from the wringer and thread, dry them and store them separately from wet accessories. Do not allow blows to the threaded part and do not leave it under constant load outside its workplace. Before re-rig, check for corrosion, crushed turns, crack or deformed contact surface.

What is the SERIE WALTER RACER 36 BOLT SMALL item code?

The SERIE WALTER RACER 36 BOLT SMALL replacement spin is coded 210503. When ordering, check the code, full name and exact model of the equipment the part is intended for. Do not rely on the photo or word SMALL alone, because close fasteners may differ in thread, length or contact shape.