What do the Balzer stoppers serve for?
The Balzer thread stoppers are used in float mounts to limit its movement along the line at the selected location. The thread forms a compact knot that must pass through the guides without loosening. After insertion, check the position and tightening it with your hand before adding the remaining elements and starting a cast.
For what diameter fishing line is the Balzer 15922001 variant?
The 15922001 variant is designated for fishing lines with a diameter of 0.10 to 0.20 mm. The package contains 6 stopper thread. Before use, adjust the diameter of the main line, because the too loose knot may shift, and excessive tightening may strain the fishing line. Do not transfer sizes from another option without explicit comparison.
How is the Balzer stopper thread placed on the line?
Pass the main fishing line through the prepared stopper thread according to the way it is arranged in the package, then tighten the knot gradually. Leave the ends long enough for control and shape them only after checking the movement through the guides. Do not pull sharply and do not allow overheating or rubbing of the main line when tightening.
How do I check that the Balzer stopper is tightened correctly?
Move the knot carefully to the desired position and make several controlled movements along the line. The component must retain its place under normal load but be able to be corrected without damaging the fishing line. Check the way through the guides as well. If the knot loosens, deforms the line or gets stuck, put a new stopper instead of tightening it excessively.
When should I change the Balzer stopper thread?
Replace the stopper knot if it starts to shift itself, if the thread is unraveled, or if the main fishing line around it is rubbed. Do a new check and after repeated passing through the guides, prolonged fishing or changing the depth. Do not reuse damaged thread, because the reliable limitation of the removable float depends on the overall knot.
How do I store the Balzer stoppers thread?
Keep unused stoppers in their original packaging, dry and separated from sharp hooks, scissors and wet accessories. Keep the label with the 0.10–0.20 mm range and code 15922001 so you don't mix them with another size. When preparing the rig, use clean hands and do not place a thread with visible unravelling or dirt on the main line.