Clear all
Spinning fishing line determines how directly you feel the lure and how cleanly you feed it with the particular fishing rod and reel. The section includes four-, six-, eight- and twelve-thread braids, but the number of threads alone does not decide which variant is correct. Start from the weight of the lures, the working range of the rod and the required stock of strength.

For over-light situations braided line NOMURA Artifice TROUT AREA X6 is a hexagonal choice in light green. The variants are 0,04 mm/PE0.4 at 4,9 kg and 0,06 mm/PE0.6 at 6,55 kg. The fishing line is targeted at UL techniques and Area Trout, being thin, soft and smooth; so combine it with a really fine set.

See more View less

When comparing different braids, look at the specified diameter and strength before the series designation. The thinner option can facilitate work with light baits, while the higher stock is appropriate under higher load. Don't switch to a thicker size just for peace of mind if you're going out of balance on the rod, reel and lure.

The spalle must absorb the fishing line evenly and under constant pressure. Excessive filling creates free turns, and loose winding increases the risk of them being cut under load. Leave a visible board so that no turns come down without control. Before winding, adjust the capacity and put a suitable pad if the working length does not fill the spool correctly. After the first casts, check the lineup and adjust immediately.

On an open shore, the light color facilitates visual line tracking, but does not replace correct control with the tip of the rod. In the course, observe the belly of the fishing line; in a side wind, remove the excess arc without pulling the bait from the work area. In contact with hard edges, check the opening section more often.

After the outing, cut off the part with the broken braid and examine the guides if the damage occurs in the same place. Salt and grit are washed away gently before the spool is retracted. A well-chosen spinning fishing line remains predictable only when the knot, drag and working meters are maintained in the same state.

For spinning, watch the fishing line along with the lure, reel and waterhole conditions, and for the general context proceed to Spinning Fishing. Then compare the options in Knitted fishing lines and complete the check through Spinning fishing lines and leaders, where the relationship between fishing line and leader is considered relative to the rig.